Add Basic Building Elements - Autodesk 256B1-05A761-1301 - AutoCAD Revit Structure Suite 2010 User Manual

Add Basic Building Elements

Place generic elements in the building model to plan the layout. You can assign specific element types later
when you refine the design.
Add walls. on page 634
Add doors.
Add windows.
Add openings.
Add roofs. on page 675
Add floors.
Add ceilings.
Add structural columns.
Add interior and exterior walls to the building
-----
model.
Add doors to the design. Specify the types of
-----
doors and their sizes.
Add windows to the design. Specify the types of
-----
windows and their sizes.
If needed, add openings in
on page 725 -----
and
Add a roof
-----
the slope of the roof, if needed.
Add floors using wall boundaries or by sketching
-----
lines.
Add ceilings using wall boundaries or by sketching
-----
lines in a Reflected Ceiling Plan view.
-----
Add columns to the building model.
walls or
ceilings.
based on the building footprint.
floors, roofs,
Adjust
Add Basic Building Elements | 25