Monitoring Global Call Admission Control Configuration; Monitoring Interfaces Configured With Traffic Engineering Bandwidth Accounting; Table 34: Show Cac Interface Output Fields - Juniper BGP - CONFIGURATION GUIDE V 11.1.X Configuration Manual

JUNOSe 11.1.x BGP and MPLS Configuration Guide
Related Topics

Monitoring Global Call Admission Control Configuration

Display global call admission control (CAC) configuration.
Purpose
To display CAC configuration:
Action
host1#show cac
resource info flood interval 180
Related Topics

Monitoring Interfaces Configured with Traffic Engineering Bandwidth Accounting

Display interfaces on which traffic engineering bandwidth accounting is configured.
Purpose
To display information about CAC interfaces:
Action
host1#show cac interface
atm2/0
Table 34 on page 322 lists the show cac interfacevc command output fields.
Meaning

Table 34: show cac interface Output Fields

322
Monitoring Global Call Admission Control Configuration
show atm vc
show cac
bandwidth 10 kbps
IP/MPLS reserveable bw 10 kbps
current total available bw 10 kbps
MPLS TE flooding threshold:
up 15 30 45 60 75 80 85 90 95 96 97 98 99 100
down 100 99 98 97 96 95 90 85 80 75 60 45 30 15
MPLS TE administrative weight 0
MPLS TE attribute flags 0
Available BW at 8 priority levels:
0 10 kbps
1 10 kbps
2 10 kbps
3 10 kbps
4 10 kbps
5 10 kbps
6 10 kbps
7 10 kbps
Field Name Field Description
bandwidth Maximum physical bandwidth in Kbps; line rate
IP/MPLS reserveable bw Total bandwidth in Kbps that can be reserved for MPLS; includes
bandwidth that is already reserved as well as bandwidth not yet
reserved