Checking The Status Of Each Device (Mirror Mode); Engines (Mirror Mode) - Yamaha CS1D Operating Manual

CS1D Operating Manual (Start-up)

Checking the status of each device (Mirror mode)

x2 x2
DSP
Here's how to check the connection status of each device when using the PM1D system in Mirror mode.

Engines (Mirror mode)

The front panel of each DSP1D-EX {DSP1D} engine displays the following information.
1 ENGINE ID
These indicators show whether the DSP1D-EX
{DSP1D} is connected to the ENGINE A or the
ENGINE B connectors (DIGITAL I/O, CONTROL I/
O) of the console.
When either the A or the B LED is lit, the corre-
sponding engine is in use. If one of the LEDs is blink-
ing, the corresponding engine is ready.
If the ENGINE ID LEDs for both engines A and B
blink when the power is turned on even though
engines A/B are both connected, please check the
connections of each engine (digital input/output
connectors, control input/output connectors).
If both LEDs are dark, digital signals or control sig-
nals are not being passed between the engine and
the console. Check the connections between
engines A/B and the console, and between the con-
sole and the power supply.
18
ENGINE ID
ENGINE ID
A B
CONTROL I/O
A B
1 2
INPUT
CONFIGURATION
48CH 96CH
POWER
ON/ OFF
CONTROL I/O
1 2
INPUT
CONFIGURATION
48CH 96CH
2 CONTROL I/O
If the CONTROL I/O connectors of the engine and
console are correctly connected, the LED will light to
indicate which of the two sets of CONTROL I/O
connectors (1 and 2) is currently being used.
When the power is turned on, engine A will be
given priority. If LED 2 lights when the power is
turned on even though connectors 1 and 2 are
both connected, check the connections for connec-
tor 1.
If LED 1 blinks, control signals are not being
passed between the engine and the console. Check
the CONTROL I/O connections between the
DSP1D-EX {DSP1D} and the CS1D.
3 INPUT CONFIGURATION
This indicates the number of monaural input chan-
nels that can be used with this engine.
The "96CH" LED will light for the DSP1D-EX, and
the "48CH" LED will light for the DSP1D.
1
2
3