Yamaha CS1D Operating Manual page 600

Crosstalk @1kHz
FROM/TO
MONITOR OUT A, B L MONITOR OUT A, B
ANALOG R ANALOG
CUE OUT L CUE OUT R
ANALOG ANALOG
PHONES OUT
Output impedance of signal generator: 150 , fs= 44.1k or 48kHz
Frequency Response 20Hz-20kHz, refer to the nominal output level @1kHz
INPUT OUTPUT
2-TRACK IN 1 PHONES
ANALOG A1, B1, A2, B2
Gain Error @1kHz
INPUT OUTPUT
2-TRACK IN 1 PHONES
ANALOG A1, B1, A2, B2
Total Harmonic Distortion
INPUT OUTPUT
2-TRACK IN 1 PHONES
ANALOG A1, B1, A2, B2
Hum & Noise
INPUT OUTPUT
PHONES
—
A1, B1, A2, B2
* Hum & Noise are measured with a 6dB/octave filter @12.7kHz;
equivalent to a 20kHz filter with infinite dB/octave attenuation.
Crosstalk @1kHz
FROM/TO TO/FROM
PHONES PHONES
A1, B1, A2, B2 L A1, B1, A2, B2 R
ANALOG INPUT (AI8 plus LMY2-ML)
A/B select
phantom ON/OFF
analog gain control
AD converter
digital gain control
ANALOG INPUT (AI8 plus LMY4-AD)
AD converter
DIGITAL INPUT (DIO8)
Option card
TO/FROM
adjacent inputs
adjacent inputs
RL
8 volume MAX @0dB
RL
8 volume MAX @0dB
RL
8 +10dB@20Hz-20kHz, volume MAX
8 full scale output @1kHz, volume MAX
RL
8 * volume MAX
8 * volume MIN
RL
8 adjacent inputs
40 adjacent inputs
+48V DC is individually supplied inputs.
–68 - +10dB (6dB step)
24bit linear +4bit floating, 128 times oversampling.
0 - 6dB (1dB step)
24bit linear +4bit floating, 128 times oversampling
MY8, MY4 series
CONDITIONS
CONDITIONS
CONDITIONS
CONDITIONS
CONDITIONS
CONDITIONS
General Specifications
MIN TYP MAX UNITS
–80 dB
–80 dB
MIN TYP MAX UNITS
–3 1 dB
MIN TYP MAX UNITS
–2 2 dB
MIN TYP MAX UNITS
0.7 %
1 %
MIN TYP MAX UNITS
–88 dB
–92 dB
MIN TYP MAX UNITS
–55 dB
–60 dB
55