Inserting An Internal Effect Into A Channel - Yamaha CS1D Operating Manual

CS1D Operating Manual (Basic Operation)

Inserting an internal effect into a channel

With this method, an internal effect can be patched between the insert out and insert in of a desired channel. As an
example, we will explain how to insert an effect into an input channel.
[Procedure]
1. In the LCD FUNCTION ACCESS block, press the
[EFFECT] switch several times to access the desired
effect screen from EFFECT 1– EFFECT 8.
LCD FUNCTION ACCESS
block
[EFFECT] switch
EFFECT 1 screen (EFFECT function)
2. Click the SEL button located in the INPUT L sec-
tion at the upper left of the screen.
The CH SELECT popup window will appear.
CH SELECT popup window
128
3. In the row of buttons at the top of the screen, click
either the "IN 1-48 INS. OUT" button or the "IN
49-96 INS. OUT" button {on the 48 channel model,
this button has no effect}.
The buttons labeled "INS. OUT" are used to patch
the effect input to the insert out of each channel. You
may also select a MIX channel or MATRIX channel
as the insert destination.
For channels that are already used by another chan-
nel, the NAME will be displayed in white characters
on a red background.
Please be aware that selecting one of these channels
may affect other functionality.
4. Click the button for the channel that you wish to
patch to the L input of the effect.
You will return to the previous effect screen, and the
insert out selected for the INPUT L section will be
displayed. As necessary, assign an insert out to the R
channel of the effect as well.
Hint
If one of two paired channels (or a stereo channel) is
patched to the L input of the effect, the other channel
will automatically be patched to the R input of the effect.
5. Click the SEL button located in the OUTPUT L sec-
tion at the upper right of the screen.
The CH SELECT popup window will appear, allow-
ing you to select a signal route as the effect send des-
tination.
CH SELECT popup window
6. In the row of buttons at the top of the screen, click
either the IN 1-48 INS. IN" button or the "IN 49-96
INS. IN" button {on the 48 channel mode, this but-
ton has no effect}.
The buttons labeled "INS. IN" are used to patch the
effect output to the insert in of each channel. Nor-
mally, you will select the insert in of the same chan-
nel that you selected in step 3.