Yamaha CS1D Operating Manual page 450

Output functions
When a scene is recalled, the DCA group data of
Recall Safe channels may be adjusted so that Recall
Safe settings are consistent within DCA groups 9–12.
Also when a channel library is recalled, the data that
is recalled to the channel may be adjusted so that set-
tings are consistent for DCA groups 9–12.
4 5 6
4 CLEAR
This button clears all output channels that were
assigned to DCA faders.
5 CUE
For each DCA fader, these buttons switch cue on/off.
(These buttons are linked with the [CUE] switches in
the DCA/GROUP block on the console.) When these
buttons are on, Cue will be turned on for all channels
assigned to the corresponding DCA fader.
6 MUTE
These buttons switch muting on/off for each DCA
fader.
Hint
If the MUTE button is on, the corresponding output
channels will be in the same state as if the DCA fader
were operated to lower the output level to –
and no signal will be output.
7 DCA LEVEL SET
These buttons operate all DCA faders at once.
ALL NOMINAL
When you click this button, any DCA 9–12 faders to
which output channels are assigned (and faders to
which no channel is assigned) will move to the nom-
inal level (0 dB) position.
ALL MINIMUM
When you click this button, any DCA 9–12 faders to
which output channels are assigned (and faders to
which no channel is assigned) will move to the –
dB position.
102
8 DCA faders 9–12
7
These indicate the DCA fader levels, following the
DCA faders on the console. You can also drag the on-
screen faders to change the levels. (When you do so,
the DCA faders on the console will follow.)
dB,
8