Yamaha CS1D Operating Manual page 287

[Procedure]
Selecting a channel
The channel to be controlled by the SELECTED OUT-
PUT CHANNEL block can be selected in the following
ways.
1. Using the [SEL] switch
You can use the following [SEL] switches to directly
select the desired output channel.
The [SEL] switch LED of the currently selected chan-
nel will light.
MIX OUTPUT block MIX [SEL] switch
Selects a MIX channel 1–48.
[SEL]
switch
MIX OUTPUT block
MIX OUTPUT
block
MATRIX OUTPUT block MATRIX [SEL] switch
Selects a MATRIX channel 1–24.
[SEL]
switch
MATRIX OUTPUT block
MATRIX OUTPUT
block
SELECTED OUTPUT CHANNEL block
STEREO OUTPUT block STEREO [SEL] switch
Selects the L channel or R channel of STEREO A/B.
If you repeatedly press the same STEREO [SEL]
switch, you will cycle between the L and R of that
channel.
ON
TO MTRX
[SEL]
switch
SEL
STEREO OUTPUT block
STEREO OUTPUT
block
ON
MONO
SEL
INS INS
57