Yamaha CS1D Operating Manual page 162

CS1D Operating Manual (Basic Operation)
7. In the LCD FUNCTION ACCESS block, press the
OUTPUT [INSERT] switch.
The OUT INSERT function screen will appear. This
contains mainly preamp settings for the input card
that is patched to the insert point.
OUT INSERT function screen
8. From the MIX 1-24 INS, MIX 25-48 INS, MATRIX
1-24 INS, and ST MAS INS tabs, click the tab that
contains the channel into which you wish to insert
the external device.
The following items will be displayed, according to
the type of input card that was patched to the insert
point in step 3.
For a mic line input card (LMY2-ML) installed in the
AI8
1 2
3
For an AD card (LMY4-AD) installed in the AI8
3
90
For a digital I/O card (MY card) installed in the DIO8
1 GAIN GANG
2 A/B LINK
3 Level meter
4 A/B
5 +48V
4
5
6 ø (phase)
6
7
7 GAIN
8
8 This shows the input channel number and the pair-
9. As necessary, adjust input card parameters such as
6
8
3
If this button is on, the head amp gain settings of
adjacent input channels in the screen will be linked
while preserving the current difference between
them.
If this button is on, the input jack A/B selection of
adjacent input channels in the screen will be linked.
This peak level meter shows the input level.
This button switches between input jacks A/B of an
AD card with head amp.
For each channel, this button is an on/off switch for
the phantom power of an AD card with head amp.
The +48V switch located on the front panel of the
AI8 input unit is the master phantom switch for the
entire unit. If this switch is off, phantom power
cannot be used with that unit (regardless of the set-
ting of the +48V button in the display).
This button switches the input signal between nor-
mal/reversed phase.
This knob adjusts the input sensitivity of the preamp.
The adjustable range is +10 dB – –68 dB, and the
current value is shown in the numerical box located
below.
ing status. You can also enable/defeat pairing by
clicking the heart symbol.
the A/B button, +48V button, GAIN, and phase.
6
8