Dca Fader Section - Yamaha CS1D Operating Manual

DCA fader section

In this section you can control the levels of the DCA groups, input channels, or MIX channels assigned to DCA groups
1–12. You can also use this section to adjust the boost/cut amount for each band of the internal graphic EQ.
1 DCA [NAME] indicator
The upper row of indicators will show the type and
number of the channel that is selected in the FADER
STATUS section. (If DCA is selected, this will show
display the DCA name of up to 8 characters.)
The display has the following meaning.
INxx ....................Twelve input channels will be
directly assigned to DCA faders
1–12. The xx digits will indicate
the channel number.
STxx ....................ST IN 1–8 are directly assigned
to DCA faders 1–8. The xx loca-
tion will indicate a channel num-
ber.
1
2
3
5
6
4
7
1 2
In this case, DCA faders 9–12
will have no effect.
MXxx.................. Twelve MIX channels will be
directly assigned to DCA faders
1–12. The xx digits will indicate
the channel number.
Other.................. DCA groups are assigned to
DCA faders 1–12, and the long
name of the DCA group will be
displayed.
The lower row of indicators displays the short name
of the channel assigned to the fader or the long name
of the DCA group. These names can be input from
the display (in the NAME screen of the IN PATCH
function or OUTPUT PATCH function).
DCA GROUP block
71