Yamaha CS1D Operating Manual page 355

METER
Make settings for the meters on the top panel of the
CS1D, the meters in the meter bridge block, and the
meters that appear in the display ( p.58).
2 Output functions
These buttons access functions related to the output
channels (MIX channels, MATRIX channels, STE-
REO A/B channels).
The content of each function is described below.
(The abbreviated function name shown in the dis-
play is given in parentheses.)
PATCH (OUT PATCH)
Assign output units to output channels ( p.76).
INSERT (OUT INSERT)
Make insertion settings for output channels
( p.86).
EQ (OUT EQ)
Make EQ settings for output channels ( p.89).
COMP (OUT COMP)
Make compressor settings for output channels
( p.93).
DELAY (OUT DELAY)
Make delay settings for output channels ( p.99).
DCA/MUTE (OUT DCA/MUTE)
Assign output channels to DCA groups or mute
groups ( p.101).
MATRIX/ST (MATRIX/ST)
Make routing settings for MIX channels
bus / STEREO bus, SUB IN
you can also make LCR mode settings for the MIX
channels ( p.105).
CH VIEW (OUT CH VIEW)
Here you can view the parameters for a single output
channel. You can also edit the channel parameters
( p.114).
2
MATRIX
MATRIX bus. Here
MON/CUE
Make settings for talkback, the internal oscillator,
and monitor/cue ( p.62).
Function menu
7