Yamaha CS1D Operating Manual page 390

Global functions
SAVE
Save the selected PM1D internal data on a memory
card as a file.
LOAD
Load the selected file from memory card.
DELETE
Delete the selected file from memory card.
VIEW
Check the contents of the selected file on memory
card.
In the file list (7), select one file that you wish to
view, and click the VIEW button. The contents of
that memory card file will be displayed.
9 Free space
This displays the free space (1 Kbyte = 1024 Bytes)
on the memory card selected in 1.
[Procedure]
Saving a file on a memory card
1. Insert a PC ATA flash storage card into [PC] card
slot A or B, located on the top panel of the CS1D.
You can use either PCMCIA Type II ATA compati-
ble memory cards or compact flash media inserted
into a PC card adapter (in either case, types with
3.3V/5V power supply voltage). Operation is not
guaranteed for other types of media.
Normally, the memory cards listed above are sold in
a formatted state. This means that you do not need
to format a card before using it on the PM1D sys-
tem.
If you need to format a card, use an external device
such as a computer to do so.
42
2. Access the UTILITY function LOAD/SAVE screen.
3. Click the SLOT A/SLOT B button to select the
memory card that you wish to use.
4. In the SAVING MEMORY SELECT section, click
the button for the item that you wish to save on the
memory card.
According to the item you select, a list of the files
saved on the memory card will be displayed.
5. If you selected scene memory or a library in step 4,
use the From No. knob and To No. knob to specify
the data that will be affected. (Alternatively, select
"ALL.")
For example if in the DISPLAY SELECT section you
select scene memories, and set the From No. knob =
01.0 and the To No. knob = 02.9, the data saved in
scene memories 01.0–02.9 of the PM1D system will
be saved to the memory card. When you later load
this file from the memory card, the data will be
loaded into the identically-numbered scene memo-
ries of the PM1D system.
6. Click the SAVE button.
A popup window will appear, in which you can input
the filename and comment.
7. Assign a filename and comment as necessary, and
click the SAVE button.
The data you specified in steps 4–5 will be saved to
the memory card.
If you save (overwrite) using the same filename as
an existing file, the previous file will be deleted.
Once you have pressed the button to execute this
operation, never insert or remove a memory card in
the PC ATA storage card slot or turn off the power
of the CS1D. Doing so may damage the file.
Please be aware that the switches in the LED func-
tion section of the CS1D can not be operated while
the operation is executing.
If you press the [CANCEL] button while saving is
in progress, all files that had been written up to that
point will be deleted. Be aware that if you were sav-
ing by overwriting, the previous files will also be
deleted.
If the EVENT RECALLING button is set to
"ENABLE" in the MIDI/GPI/TC function TC
EVENT screen, the SAVE button will be grayed, and
data cannot be written.