Yamaha CS1D Operating Manual page 535

2
3
4
2 Library list
This shows a list of the input channel data stored in
memory.
The highlighted line is currently selected for opera-
tions.
3 STORE/RECALL buttons
These buttons store/recall input channel data.
Each button has the following function.
RECALL
Load the currently selected input channel data from
the library list into the input channel selected in the
CH VIEW screen (IN CH VIEW function).
It is not possible to recall if the pairing state of the
recall channel does not match the pairing state
stored in the selected library list.
However, LIBRARY No.00 Initial Data can be
recalled to either paired or unpaired channels.
STORE
Store the channel settings of the input channel cur-
rently selected in the CH VIEW screen (IN CH VIEW
function) to the number selected in the library list.
When you click this button, the LIBRARY STORE
popup window will appear, allowing you to assign a
name to the input channel data.
TITLE EDIT
This edits the title of the input channel data currently
selected in the library list.
The TITLE EDIT button is valid only if data has
actually been stored in the number selected in the
library list. If a number with no data is selected, the
button text will be gray, and the button cannot be
used.
Store the edited content of the INPUT CHANNEL
LIBRARY window back into the same library num-
ber.
Hint
The APPLY EDIT button is valid only if the data of
the number selected in the library list has been
edited. If a number with no data is selected, or if un-
edited data is selected, and if a number marked
"READ ONLY" is selected, the button text will be
gray, and the button cannot be used.
4 EDIT
If you edit the input channel data selected in the
library list (2), this area will indicate "EDIT."
5 EXIT
This button exits the INPUT CHANNEL LIBRARY
window and returns to the previous screen.
5
Recall can be used only if the library contents and the
recall destination are both monaural input channels
or both paired (stereo) input channels. For other
combinations, the RECALL button will be grayed,
and the Recall operation cannot be performed.
However, Initial Data can be recalled for any input
channel.
If the library contents differ from the VARI/FIX or
MONO/PAIR settings of the current MIX bus, the
SEND-related parameters for that MIX bus will be
partially not recalled.
Hint
For a list of the parameters that are saved in the
channel library, refer to "CS1D Reference Manual
(Appendices)" section "Channel library list."
INPUT CHANNEL LIBRARY
APPLY EDIT
187