Yamaha CS1D Operating Manual page 10

Changes in the RECALL SAFE
screen
A SET ALL button and CLEAR ALL button have been
added to the SCENE function RECALL SAFE screen,
allowing Recall Safe to be set/cleared simultaneously for
all units.
2 1
When you click the SET ALL button (1), all units will
be set to Recall Safe. When you click the CLEAR ALL
button (2), Recall Safe will be defeated for all units.
If the SET ALL button is on, all units (including
units that are not displayed in this screen) will be
set to Recall Safe. Please be aware that Recall Safe
will be applied to units that are not currently
patched, and to units that are patched to Insert.
Reference pages
Basic operation, page 106
Software section, pages 23, 24
Input/output unit sharing
Multiple PM1D systems can now share various types of
input/output unit (AI8, AO8, DIO8).
Specifying the Unique ID
If you want multiple PM1D systems to share an input/
output unit, you must first specify a Unique ID for each
engine. The Unique ID is an identifying number that
specifies the engine that will be the control source when
multiple engines (DSP1D-EX {DSP1D}) are connected
in parallel to an input/output unit. (When the PM1D
system is in the default state, engine A is set by default to
ID=1, and engine B to ID=2.)
If you want to change this ID, access the SYS/W.CLOCK
function SYSTEM CONNECTION screen, and click the
button located above the graphic of the engine.
(Alternatively, move the cursor to the button and press
the [ENTER] key.)
When you click the button, a popup window will appear,
allowing you to select the Unique ID.
In this window, the button of the currently-selected ID
will be on. Select a new ID, and click the OK button.
The modified Unique ID will not take effect until you
restart the PM1D system. Turn off the power of all com-
ponents, and then turn the power on again.
Make sure that the Unique ID of each engine does
not coincide. If the ID numbers coincide, the units
may malfunction.
Hint
Unique ID settings need to be made only if an input/
output unit is being shared by multiple engines.
UNIQUE No. button
9