Yamaha CS1D Operating Manual page 483

HIGH band
Level
5 EQ ON/OFF
This button switches the four-band EQ on/off.
6 EQ graph
This graph displays the settings of the various EQ
parameters. The colored vertical lines indicate the
Freq (center frequency) of each band. (Each of these
lines is the color of the markings around the knobs of
the corresponding band.) As you adjust the Q or
Gain of each band, the response curve will change
accordingly.
0
A
B
0 HPF (high pass filter)
This knob specifies the cutoff frequency of the high
pass filter. The range is 20 Hz – 600 Hz.
Center
Frequency
Crossover Gain
Frequency
5
6
C
IN EQ (Input equalizer) functions
8
7 INPUT EQ LIBRARY
This button accesses the EQ LIBRARY window,
allowing you to store/recall EQ settings ( p.176).
8 EQ FLAT
This button resets the parameters of the four-band
EQ to their default values (±0.0 dB).
9 Level meter
These meters display the peak levels before the EQ
and after the EQ. If the signal clips before or after the
EQ, the corresponding CLIP segment will light.
E F
A HPF ON/OFF (high pass filter on/off)
This button switches the high pass filter on/off.
7
9
D
135