Libraries
UNIT LIBRARY
[Function]
Here you can store and recall the settings (unit data) of all input/output units included in the PM1D system.
Here you can also view and edit the connection state and settings of the input/output units.
Display
MENU button
IN HA/INSERT
button
ST IN INS/UNIT LIB tab
UNIT LIBRARY button
MENU button
OUT INSERT
button
ST MAS INS/UNIT LIB
tab
UNIT LIBRARY button
The unit data that is saved in
the Unit library contains set-
tings for both input units and
output units.
[Screen functions]
3
2
The screen shown above is for when the library is
accessed from the IN HA/INSERT function.
170
1
1 UNIT SELECT
For the input unit data that is currently selected in
the library list 4 , these buttons select the type of
input/output unit that is to be displayed/edited.
The settings of the units you select here will be dis-
played in the edit section 2 .
2 Edit section
This displays a list of settings for each card of the
units you selected in 1 . You can use the buttons and
knobs to edit the settings.
Use the right scroll bars to access cards that are not
currently displayed.
3 Input/output selection
Select whether the input unit (INPUT button) or the
output unit (OUTPUT button) settings will be dis-
played in 2 .