Setting The Word Clock (Standard Mode) - Yamaha CS1D Operating Manual

CS1D Operating Manual (Start-up)

Setting the word clock (Standard mode)

In order for the PM1D system to function, word clock (audio system clock) synchronization must be established
between all devices of the system. In this screen you can specify the word clock that will operate the PM1D system. In
general, the frequency of this clock is referred to as the sampling rate or sampling frequency.
[Procedure]
1. In the LCD FUNCTION ACCESS block, press the
[SYS/W.CLOCK] switch several times to access the
following screen.
LCD FUNCTION ACCESS
block
[SYS/W.CLOCK] switch
Settings for the word clock of the PM1D system are
made in this screen.
2. In the screen area marked "SETTING LEVEL,"
make sure that the BASIC button is on (displayed
in green).
If the ADVANCED button is on instead of the BASIC
button, click the BASIC button.
24