Insert Patch - Yamaha CS1D Operating Manual

Output functions

INSERT PATCH

[Function]
For each output channel, patch the input/output jacks where external devices such as effect processors will be
inserted.
Console
In the LCD FUNCTION ACCESS
block, press the OUTPUT [PATCH]
switch (press repeatedly until the
screen shown at the right appears)
Display
MENU button OUTPUT PATCH
button INSERT PATCH tab
[Screen functions]
1
1 CH (output channel)
This is the number of the output channel for which
insertion input/output jacks are being patched. The
number corresponding to the grid where the cursor
is currently located will be highlighted.
2 Short name
This displays the short name that has been assigned
to each output channel. You can click this area to
access the CH NAME EDIT window and assign a
short name/long name ( p.83).
3 ASSIGN
This shows the number of outputs assigned to each
output channel for insertion output.
78
4
2 3 6
4 SELECTED PATCH
This shows the output number/long name for the
grid location where the cursor is currently located.
5 OUT UNIT/SLOT/CH (output unit/slot/channel)
From the top, these indicate the type and number of
the output unit, the slot number, and the channel
number of the output jack.
By clicking the
output unit/slot rows, you can switch the display by
units. By clicking the
the display by slots.
5
buttons at either end of the
buttons you can switch