Yamaha CS1D Operating Manual page 473

4 INSERT I/O POINT
For each input channel, select the insert I/O point
(the location in the signal path at which the external
device will be inserted) from the following choices.
PRE EQ ...............Immediately before the EQ
POST EQ ............Immediately after the EQ
PRE COMP.........Immediately before the com-
pressor
PRE DELAY ........Immediately before the delay
PRE FADER........Immediately before the fader
5 DIRECT OUT POINT
For each input channel, select the direct point (the
location in the signal patch from which direct output
will occur) from the following choices.
PRE EQ ...............Immediately before the EQ
PRE FADER........Immediately before the fader
POST FADER .....Immediately after the fader
POST ON............Immediately after the [ON]
switch
4
IN PATCH functions
5
125