Yamaha CS1D Operating Manual page 184

CS1D Operating Manual (Basic Operation)
Detail of the CUE section
CUE ACTIVE LED
2. In the LCD FUNCTION ACCESS block, press the
[MON/CUE] switch several times to access the fol-
lowing MONITOR A screen.
LCD FUNCTION ACCESS
block
MONITOR A screen (MON/CUE function)
In the MONITOR A screen you can make various
settings related to the MONITOR A output. Here we
will specify the source that will be monitored when
the SOURCE [DEFINE] switch of the MONITOR A
section is pressed.
112
[MON/CUE] switch
3. Use the buttons arranged in the DEFINE section of
the screen to select the source that will be moni-
tored when the SOURCE [DEFINE] switch is
pressed.
You can select from the following monitor sources.
MIX 1–48 ........... Output signals of MIX buses 1–
48
MATRIX 1–24.... Output signals of MATRIX buses
1–24
2TR IN 3–6 ........ Input signals from 2-TRACK IN
DIGITAL jacks 3–6 of the CS1D
console
Hint
In the MONITOR A screen you can also use func-
tions such as DIRECT IN to directly monitor the sig-
nal from a specific input jack, or COMM IN to
monitor the signal from a specific input jack via the
MONITOR A output when that signal exceeds a cer-
tain level. For details refer to "CS1D Reference Man-
ual (Software)".
4. In the MASTER block MONITOR A section, press
one of the SOURCE [2TR IN 1]/[2TR IN 2]/[ST A]/
[ST B]/[DEFINE] switches to select the source that
you wish to monitor.
The following sources correspond to each switch.
[2TR IN 1] switch.... The input signal from the 2-
[2TR IN 2] switch.... The input signal from the 2-
[ST A] switch ........... The output signal of the STE-
[ST B] switch ........... The output signal of the STE-
[DEFINE] switch ....... The signal previously speci-
5. Turn on the MONITOR A [ON] switch.
6. Use the MONITOR A [LEVEL] volume to adjust the
output level from the MONITOR OUT A jacks.
Alternatively, use the MONITOR A [PHONES] vol-
ume to adjust the output level of the PHONES
MONITOR A jack.
Hint
The MONITOR A [LEVEL] volume and MONITOR
A [PHONES] volume are independent.
TRACK IN DIGITAL 1 jack
or 2-TRACK IN ANALOG 1
jacks located on the CS1D
rear panel
TRACK IN DIGITAL 2 jack
or 2-TRACK IN ANALOG 2
jacks located on the CS1D
rear panel
REO A channel
REO B channel
fied in the display (MON/
CUE function MONITOR A
screen)