Yamaha CS1D Operating Manual page 226

CS1D Operating Manual (Basic Operation)
BOOKMARK (parameters: none)
Access the last-registered screen. The LED will light
for a USER DEFINE switch to which this function is
assigned if a screen has been assigned. When the
functions of the USER DEFINE [1]–[8] switches are
shown in the lower part of the display, the name of
the screen assigned as a BOOKMARK will be shown
at the position of the corresponding switch.
Hint
To register a screen, press and hold the USER
DEFINE switch to which the BOOKMARK function
was assigned for two seconds or longer. If you release
the switch in less than two seconds, the last-regis-
tered screen will be recalled.
3. Select the function that you wish to assign to the
switch, and the parameter specific to that function.
4. Press the OK button.
5. Repeat steps 2–5 until you have assigned the
desired function to each of the USER DEFINE [1]–
[8] switches.
6. To execute an assigned function, press one of the
USER DEFINE [1]–[8] switches in the USER
DEFINE block.
Hint
Functions assigned to the USER DEFINE [1]–[8]
switches can also be executed within the display. To
do so, click the USER DEFINE button in the lower
left of the screen to make the USER DEFINE 1–8
buttons appear in the lower part of the screen, and
then click the desired button.
USER DEFINE button
Show the USER DEFINE 1–8 buttons in the lower
part of the screen
154