Yamaha CS1D Operating Manual page 103

2. Use the vertical scroll bar to access the patch source
output channel.
The vertical axis of the screen shows the patch source
MIX channel (MIX 1–48), MATRIX channel (MTRX
1–24), or STEREO A/B channel (ST AL/AR, ST BL/
BR). To view a portion that is not currently visible,
use the vertical scroll bar.
Output channel type
and number
Output channel name
3. Use the horizontal scroll bar to access the patch
destination output unit.
The horizontal axis of the screen shows the output
unit ID number/card slot number/input jack channel
number. To view a unit/card/input jack that is not
currently visible, use the horizontal scroll bar.
Hint
By clicking the / buttons you can scroll the
display by units. By clicking the
can scroll the display by slots.
4. Click the grid where the patch source and patch
destination intersect.
5. In the same way, patch other units/cards/output
jacks to output channels.
Although it is possible to patch a single output
channel to multiple output jacks, it is not possible
to patch multiple output channels to a single out-
put jack.
6. To assign a name to an output channel, click the
button located at the right of the channel number.
The NAME EDIT popup window will appear in
which you can input the name.
7. In the NAME EDIT popup window, move the cur-
sor to the SHORT or LONG text input box, and
input the desired name. (For the procedure refer to
p.20.)
8. When you have input the name, click the STORE
button.
You will return to the OUTPUT PATCH screen, and
the name will be displayed at the right of the channel
number.
To patch the desired output jack and output channel, click
this grid to display a " " symbol.
This indicates the number of output jacks that are
patched to the output channel.
9. As necessary, assign names to other channels as
/ buttons you
Chapter 3. Audio connections and patching
Hint
The short name you assign to each channel will be
displayed in various screens of the display and in the
[NAME] indicator of the CS1D console.
well.
Hint
If you wish to assign names to numerous output
channels at once, it is convenient to use the OUT
PATCH function NAME screen. ("CS1D Reference
Manual (Software)" p.83)
From above, this indicates
the type and number of
output unit/card slot num-
ber/output jack channel
number.
31