Compare Mode; Parameter Check Mode; Checking Parameter Values In The Play Mode - Yamaha GW33 Owner's Manual

HINT 1 When editing an effect, make sure that the
Level or Mix parameters of the effect are set to
relatively high values before adjusting any other
parameters. Doing this ensures that any changes you
make with the other Parameter Dials will be fairly
noticeable.
For information about each of the effects and their
parameters, refer to the section EFFECTS AND
PARAMETERS on page 20.

Compare Mode

While editing an effect program, you can compare the
sound of the newly edited program with the original
one.
To do this, press the e button (during
editing). (The EDIT/COMPARE lamp flashes to
indicate the Compare mode is active.)
EDIT/
COMPARE
Each press of the e button switches back
and forth between the original program (lamp flashes)
and your new edits (lamp lights continuously).
While the EDIT/COMPARE lamp is flashing (Com-
pare mode), you can hear the sound of the original
effect program. You can also view the original param-
eter values: simply select the desired effect block with
the y and n buttons and turn the Param-
eter Dials. Values cannot be changed in this condition;
they are only displayed so that you can compare them
with values you've edited.
1
1 1
1
1
1 1
1
1 1
1
1
1
1 1
1
1
1 1
1
1
1 1
1
1
1 1
1
1
1 1
1
1
1 1
1
1
1
1 1
1
1
1 1
1
1 1
1 1
1 1
1 1
1
1 1
1 1
1 1
1 1
1 1
1 1
1 1
1 1
1 1
1 1
1 1
EDIT/
1 1
COMPARE
1 1
1 1
1 1
1 1
1 1
1 1
1 1
1 1
1 1
1 1
1 1
1 1
1 1
1 1
1 1
1 1
1 1
1 1
1 1
1 1
1 1
1 1
1 1
1 1
1 1
1 1
1 1
1 1
1 1
1 1
1 1
1 1
1 1
1 1
1 1
1 1
1 1
1 1
1 1
1 1
1 1
1
HINT 2 If you are using the optional FC7 Foot
Controller, try experimenting with the Foot Controller-
related Volume Position, Minimum Volume and Total
Level parameters in the Noise Gate/Utility block. (See
FOOT CONTROLLER OPERATIONS on page 30.)
5
Save the new settings to memory, if desired. (See
the section SAVING EFFECT PROGRAMS on
page 31 for details.)

Parameter Check Mode

When editing an effect program, the Parameter Check
mode allows you to view the newly edited parameter
values of a selected effect block without changing
them.
To do this, select an effect block (during editing, when
the EDIT/COMPARE lamp is lit continuously).
Then, simultaneously press the y and n
buttons. (The selected effect block lamp flashes to
indicate the Parameter Check mode is active.)
YES
••••••
• •
• •
• •
• •
• •
•••••
• •
• •
• •
• •
• •
•••••• NO
To view the edited parameter values for the selected
effect block, turn the corresponding Parameter Dials.
As in the Compare mode, values cannot be changed in
this condition.
To return to normal editing, press one of the y
and n buttons.

Checking Parameter Values in the Play Mode

You can also check parameter values while in the play
mode. To do this:
1
Use the y and n buttons to select
the desired effect block row.
2
To view the current parameter values for the
selected block, turn the corresponding Parameter
Dials.
• • PARAM
• •
••••••••••••••••••••••
• •
CHECK
19