Storing Effect Data To The Library - Yamaha CS1D Operating Manual

Storing effect data to the library

You can store (save) effect parameter settings in the effect library for later re-use.
[Procedure]
1. In the LCD FUNCTION ACCESS block, press the
[EFFECT] switch several times to select the desired
screen from EFFECT 1 – EFFECT 8.
LCD FUNCTION ACCESS
block
[EFFECT] switch
2. Click the EFFECT LIBRARY button located in the
upper right of the screen.
The EFFECT LIBRARY popup window will appear.
EFFECT LIBRARY button
EFFECT LIBRARY popup window
3. From the library list, select the number into which
you wish to store the data, and click that line.
Data displayed as "READ ONLY" contains factory
preset data. It is not possible to overwrite data onto
these numbers.
4. Click the STORE button.
The LIBRARY STORE popup window will appear, in
which you can assign a name to the data that you are
storing.
Chapter 12. Internal effects
LIBRARY STORE popup window
5. Use the character palette to assign a name to the
data.
For details on using the character palette, refer to
p.20.
6. Click the STORE button.
A window will ask you to confirm the Store opera-
tion.
Store confirmation window
7. To execute the Store operation, click the OK button.
You will exit the library popup window and return to
the previous screen.
If you click the CANCEL button instead of the OK
button, the Store operation will be cancelled and you
will return to the library popup window.
133