Chapter 14. Midi/Time Code; Using Midi Program Changes To Control Events - Yamaha CS1D Operating Manual

Chapter 14. MIDI/Time Code

This chapter explains how MIDI messages and time code (LTC) can be used to control events on the PM1D.

Using MIDI program changes to control events

On the PM1D system, you can assign specific events (scene recall/effect recall) to MIDI program numbers, so that the
specified event will be executed when the corresponding MIDI program change number is received. It is also possible to
cause program change messages to be transmitted to an external device when a specific event is executed on the console.
[Procedure]
1. Connect the MIDI OUT connector of the external
device to the MIDI IN connector of the console (or
engine). Connect, the MIDI OUT connector of the
console (or engine) to the MIDI IN connector of the
external device.
MIDI connections between the PM1D system and an external device
MIDI OUT
2. In the LCD FUNCTION ACCESS block, press the
[MIDI/GPI/TC] switch several times to access the
following MIDI PROGRAM screen.
LCD FUNCTION ACCESS
block
[MIDI/GPI/TC] switch
MIDI IN
Console (CS1D)
MIDI OUT
External device
(MIDI sequencer, etc.)
MIDI PROGRAM screen (MIDI/GPI/TC function)
In the MIDI PROGRAM screen you can select the
port at which MIDI messages will be transmitted and
received, specify how they will be transmitted and
received, and assign an event to each program num-
ber.
MIDI IN
139