External User Interfaces - Yamaha CS1D Operating Manual

CS1D Operating Manual (Basic Operation)
Data entry block
The data entry block contains controllers used to modify
the settings and values in the display.
Data entry block
3
4
1 CURSOR [ ]/[ ]/[
√
These switches are used to move the cursor in the
display to the desired parameter.

External user interfaces

As necessary, the following external user interfaces can be added to the PM1D system.
Mouse
A PS/2 compatible mouse can be connected to the
MOUSE connector on the rear panel/top panel of the
CS1D, and used in the same way as the track pad.
Keyboard
A PS/2 compatible keyboard can be connected to the
KEYBOARD connector on the rear panel/top panel
of the CS1D, and used to input characters/numerals/
symbols in the same way as the character palette.
12
1
6
2
5
]/[ ] switches
®
2 [DEC/CANCEL]/[INC/OK] switches
These are used to increase or decrease the value of
the parameter at which the cursor is located in the
display. These switches can also be used instead of
the CANCEL button or OK button shown in the
window that asks you to confirm a Recall or Store
operation before it is executed.
3 [SHIFT/GRAB] switch
When the cursor in the display is located at a knob-
type parameter that has a broad range of adjustment,
you can hold down this switch and use the [DEC/
CANCEL]/[INC/OK] switches or rotate the [DATA]
encoder to change the parameter value in larger
steps.
In some screens, you can hold down this switch and
use the CURSOR [ ]/[ ]/[
move the cursor from its current location to another
area. For details refer to the explanations of each
screen in the reference manual (software section).
4 [ENTER] switch
This switch is used to turn on/off the button at the
cursor location, or to open a popup window.
5 [DATA] encoder
This is used to increase or decrease the value of the
parameter at which the cursor is located in the dis-
play. If you hold down the [SHIFT/GRAB] switch
while you rotate the [DATA] encoder, the parameter
value will change more rapidly.
6 Track pad and left/right switches
This is used to move the pointer in the display, or to
select a specific parameter.
When you are operating a knob-type display param-
eter that has a broad range of adjustment, you can
hold down the right switch of the track pad and
operate the pad to change the parameter value in
larger steps.
The function of each key is listed below. (Key layout
is according to the English-language keyboard.)
Key
Same function as the [DEC/CANCEL]
PageDown
switch of the data entry block
Same function as the [INC/OK] switch of
PageDown
the data entry block
Numeric key-
Same function as the [CURSOR]
pad 4, 6, 2, 8
switches
(NumLock key
= off)
Same function as moving the [DATA]
Alt+PageUp
encoder in the INC direction
]/[ ] switches to
√ ®
Function