Yamaha CS1D Operating Manual page 467

Hint
If PATCH CONFIRMATION is turned on in the
UTILITY function PREFERENCE screen, a popup
window will ask you for confirmation each time you
attempt to change the patch settings.
You can patch a single input jack to multiple input
channels, but you cannot patch multiple input jacks
to a single input channel.
5 AUTO SETUP button
This button patches input channels starting from
channel 1 to the currently-connected input units. At
this time, the effect returns will be assigned to ST IN.
When you press the AUTO SETUP button, a popup
window will appear.
If you click OK, AUTO SETUP will be executed to
perform the patches automatically.
6 INPUT UNIT/SLOT/CH (input unit/slot/channel)
In order from the top, these are the type and ID
number of the input unit, slot number, and input
jack channel number. The abbreviations displayed in
the input unit line indicate the following.
INx (DIO8).........DIO8 digital input/output unit
(x is the unit ID number)
INx (AI8) ............AI8 analog input unit
(x is the unit ID number)
2TR IN ................Input signal from one of the 2
TR IN connectors 1–6 on the
rear panel of the CS1D console
TB........................Talkback signal
EFF RTN .............Return signal to internal effect
1–8
By clicking the
input unit/slot line, you can switch the display by
units. By clicking the
the display by slots.
7 ASSIGN
This displays the total number of channels that are
patched to each input jack.
Input jacks patched in other screens will be counted
even if they are not patched in this screen. However,
key-in signals that are patched will not be counted.
8 PATCH LIBRARY button
This button is used to access the PATCH LIBRARY
window in which you can save/load the patch status
as a library ( p.172).
6
7
IN PATCH functions
buttons at either end of the
buttons you can switch
8
119