Comp Prm (Compressor Parameters) - Yamaha CS1D Operating Manual

Input functions

COMP PRM (compressor parameters)

[Function]
Make compressor-related settings for the selected input channel.
Console
In the LCD FUNCTION ACCESS
block, press the INPUT [GATE/
COMP] switch (press repeatedly
until the screen shown at the right
appears)
Display
MENU button INPUT GATE/
COMP button COMP PRM tab
[Screen functions]
1
2
1 SEL (channel select)
This button accesses the CH SELECT popup win-
dow, allowing you to select the channel to which
your operations will apply.
142
3
2 Level meters
These meters show the amount of gain reduction, the
peak levels before and after the compressor, and the
peak level of the key-in signal (the reference signal
that operates the compressor). When the signal clips,
the corresponding CLIP segment will light.
Hint
If you have selected two paired channels or either
side of a stereo input channel, level meters for both
channels will be displayed.
In the UTILITY function PREFERENCE screen, you
can specify whether the GR meter display will be
linked to the compressor on/off setting. If linking is
turned on, the GR meter will be displayed only when
the compressor is on, and will be hidden when the
compressor is off. If linking is turned off, the GR
meter will always be displayed.
3 Input channel number and short name
This shows the number, the short name, and the
pairing status of the currently selected input channel.
You can click the heart symbol to enable/defeat pair-
ing.