Yamaha CS1D Operating Manual page 533

3 STORE/RECALL buttons
These buttons store/recall output compressor data.
Each button has the following function.
RECALL
Load the currently selected output compressor data
from the library list into the output channel selected
in the COMP PARAMETER screen (OUT COMP
function).
STORE
Store the compressor data of the channel selected in
the COMP PARAMETER screen to the number
selected in the library list. When you click this but-
ton, the LIBRARY STORE popup window will
appear, allowing you to assign a name to the output
compressor data.
Output compressor data displayed as "READ
ONLY" in the library list is read-only preset data.
New compressor data cannot be overwritten onto
these locations.
TITLE EDIT
This edits the title of the output compressor data
currently selected in the library list.
The TITLE EDIT button is valid only if data has
actually been stored in the number selected in the
library list. If a number with no data is selected, the
button text will be gray, and the button cannot be
used.
APPLY EDIT
Store the edited content of the OUTPUT COMP
LIBRARY window back into the same library num-
ber.
Hint
The APPLY EDIT button is valid only if the data of
the number selected in the library list has been
edited. If un-edited data is selected, and if a number
marked "READ ONLY" is selected, the button text
will be gray, and the button cannot be used.
4 EDIT
If you edit the output compressor data selected in the
library list (2), this area will indicate "EDIT."
5 EXIT
This button exits the OUTPUT COMP LIBRARY
window and returns to the previous screen.
Key-in settings are not stored in the library.
OUTPUT COMP LIBRARY
185