Using The Delay - Yamaha CS1D Operating Manual

Using the delay

By using the DELAY section of the SELECTED INPUT CHANNEL block, you can delay the input signal of an input
channel by a specified interval. For example, this is useful when you wish to compensate for time differences between mic
placed at a distance from each other.
[Procedure]
1. Use the INPUT block [SEL] switches or the ST IN
block [L]/[R] switches to select the input channel
that you wish to control.
2. In the DELAY section of the SELECTED INPUT
CHANNEL block, turn on the DELAY [ON] switch.
DELAY [ON] switch
ON
DELAY
The switch LED will light, and the delay function will
be active for that channel.
3. Use the DELAY [TIME] encoder to set the delay
time.
The delay time can be set in a range of 0–250 msec.
Hint
Even for a ST IN channel or for paired input chan-
nels, delay settings must be set individually. Select
each channel in turn, and make separate settings for
each channel.
DELAY [TIME] encoder
TIME
msec
Chapter 4. Basic operation for input channels
51