Table of Contents
Advertisement
DEVICE NUMBER
INDEPENDENT
PLAV
This job sets the MIDI device number of the MSS1.
1.
2.
From the RECORD
or EDIT mode, press the UTILITY key, enter "5" and press
ENTER.
Enter the desired MIDI device number via the 10-key pad or by using the YES»
and «NO keys. Available device numbers a 1 through 16, with the "all" setting
enabling the MSS1
on all device numbers.
RECORD
eS
po
Enter "5"
EDIT
N
=,
Enter MIDI no.
Device
=
This job sets the MSS1
to output MIDI data timing data at any specified tempo.
1.
N
4.
5.
Press the UTILITY key, enter "9" via the 10-key pad and press ENTER. The
"INDEPENDENT
PLAY" display will appear on the LCD, and all LED digits
except the TEMPO display will go out.
Set the desired tempo using the 10-key pad or YES» and «NO keys.
Press START to begin transmitting MIDI timing data via the MIDI OUT terminals
at the selected tempo. The tempo may be varied as described in step 2 while
in the RUN mode.
Press the STOP key to stop transmission of MIDI timing data.
The STOP key
can be pressed again to continue transmission of MIDI timing data.
Press the UTILITY key to exit from the INDEPENDENT
PLAY mode.
10-key pad and pressing ENTER.
у
Enter "9"
EN
| UTILITY
|
p
N
ENTER
tà
INDEPENDENT
PLAY
Set tempo
42
Advertisement
Table of Contents
