Talkback In 2 Section; Cue Out Analog Section - Yamaha CS1D Operating Manual

TALKBACK IN 2 section

TALKBACK IN 2
1

CUE OUT ANALOG section

CUE OUT
ANALOG
1
1 TALKBACK IN 2 jack
1 CUE OUT L/R jacks (A/B)
L
R
This is an XLR-3-31 jack for connecting a talkback
mic.
The talkback signal that is input from this jack will
be mixed within the CS1D with the signal from the
TALKBACK 1 jack on the top panel, and sent to the
same buses or output jacks.
Hint
Phantom power for the TALKBACK IN 2 jack can be
switched on/off in the display (MON/CUE function
TALKBACK screen).
The level of the signal that is input from the TALK-
BACK IN 2 jack can be adjusted on the top panel
(TALKBACK [LEVEL] volume).
The input sensitivity of the TALKBACK 1 jack and
TALKBACK 2 jack can be switched individually.
When the input sensitivity is +10 dB, a +10 dB input
signal will be nominal input. The input sensitivity is
switched in the MON/CUE function TALKBACK
screen.
These are XLR-3-32 (balanced) jacks that output the
cue signal.
Rear panel block
109