Direct Out; Direct Out Connections; Directly Outputting An Input Channel Signal - Yamaha CS1D Operating Manual

Direct out

An input source patched to an input channel can be output directly from a desired output jack without being affected by
the STEREO bus or MIX buses.

Direct out connections

If you wish to directly output a specific signal, you can use an output jack of an output unit as a direct output.
Direct out connection example 1
1 2 3 4 5
AO8 analog
output unit
Mixer

Directly outputting an input channel signal

[Procedure]
1. In the LCD FUNCTION ACCESS block, press the
INPUT [PATCH] switch several times to access the
following DIRECT OUT PATCH screen (IN PATCH
function).
In the DIRECT OUT PATCH screen, you can patch
the desired input channel to an output jack that will
be the direct output destination.
LCD FUNCTION ACCESS
block
INPUT [PATCH] switch
6 7 8
OUTPUT UNIT NO.
INPUT SELECTOR
A
B
POWER
ON/ OFF
ANALOG OUTPUT BOX
Chapter 6. Insert and direct out
Direct out connection example 2
DIO8 digital input/output
unit
DIGITAL IN
ADAT
Digital MTR
DIRECT OUT PATCH screen (IN PATCH function)
I/O UNIT ID
PORT B SELECTOR
5-8
1-4
POWER
ON/ OFF
91