Input Functions; In Patch Functions; Assign Input/Output Units To Input Channels/Insert I/O/Direct Out; Input Patch - Yamaha CS1D Operating Manual

Input functions

IN PATCH functions

Assign input/output units to input channels/insert I/O/direct out

INPUT PATCH

[Function]
Patch the input jacks of the input units, 2TR IN jacks, effect returns, and talkback to the desired input channel
(monaural/stereo).
Console
In the LCD FUNCTION ACCESS
block, press the INPUT [PATCH]
switch (press repeatedly until the
screen shown at the right appears)
Display
MENU button INPUT PATCH
button INPUT PATCH tab
[Screen functions]
3
1
2
1 CH (input channel)
This is the number of the patch destination input
channel.
The channel number of the grid where the cursor is
currently located will be highlighted.
118
5
4
2 Short name
The short name assigned to each input channel is
displayed here. You can also click this area to assign a
short name/long name.
3 SELECTED PATCH (currently selected patch)
This shows the input channel number/long name for
the grid location of the cursor.
4 Grid
This grid allows input jacks (horizontal lines) to be
patched to input channels (vertical columns). Cur-
rently-patched grids are indicated by a
Move the cursor to the desired grid, and press the
[ENTER] switch (or click) to set/cancel the patch.
symbol.