Using The Monitor B Section To Monitor A Signal - Yamaha CS1D Operating Manual

7. As necessary, use the DELAY [ON] switch and the
DELAY [TIME] encoder to set the dedicated delay
for MONITOR A.
The [ON] switch at left switches the delay on/off, and
the [TIME] encoder at right sets the delay time. The
delay time range is 0 msec – 750 msec.
8. If you wish to monitor the MONITOR A output in
monaural, turn on the [L MONO] switch or
[R MONO] switch.
According to the on/off status of the MONITOR A
[L MONO]/[R MONO] switches, the MONITOR A
output will change as shown on the following table.

Using the MONITOR B section to monitor a signal

Here's how to use the MONITOR A section to monitor the desired source.
[Procedure]
1. Make sure that your monitor system is connected
to MONITOR OUT jacks B on the rear panel of the
CS1D. Alternatively, connect a set of headphones to
the MONITOR B headphone jack on the top panel
or front panel of the CS1D.
Do not use the top panel PHONES MONITOR jack
simultaneously with the front panel MONITOR
headphone jack. Doing so may cause the CS1D to
malfunction due to excessive current.
2. In the LCD FUNCTION ACCESS block, press the
[MON/CUE] switch several times to access the fol-
lowing MONITOR B screen.
LCD FUNCTION ACCESS
block
[MON/CUE] switch
MONITOR A [L MONO]/[R MONO] switches
[L MONO] [R MONO]
MONITOR A output signal
switch switch
Dark Dark
Stereo signal
Lit Dark
Monaural signal of left channel only
Dark Lit
Monaural signal of right channel
only
Lit Lit
Monaural signal of mixed left and
right channels
MONITOR B screen (MON/CUE function)
In the MONITOR B screen you can make various
settings related to the MONITOR B output. Here we
will specify the source that will be monitored when
the SOURCE [DEFINE] switch of the MONITOR B
section is pressed.
3. Use the buttons arranged in the DEFINE section of
the screen to select the source that will be moni-
tored when the SOURCE [DEFINE] switch is
pressed.
You can select from the following monitor sources.
MIX 1–48 ........... Output signals of MIX buses 1–
48
MATRIX 1–24.... Output signals of MATRIX buses
1–24
2TR IN 3–6......... Input signals from 2-TRACK IN
DIGITAL jacks 3–6 of the CS1D
console
Chapter 10. Monitor
113