Effect Connection In Each Mode (Effect Connection Edit) - Yamaha MOTIF RACK ES Owner's Manual

EQ for which all bands are set to peaking type
Gain
Q (frequency bandwidth)
+
0
–
3 bands LOW LOWMID

Effect connection in each mode (Effect Connection Edit)

Select the desired parameter for editing by using the cursor [L][M] buttons and change the settings with the data dial.
Voice mode
The Effect parameters in the Voice mode are set for each Voice and the settings are stored as a User Voice. Note that the Master Effect and
Master EQ parameters are set for all the Voices in the Utility mode. Once the Master Effect and EQ settings have been made, they can be
stored as System settings by pressing the [EXIT] button.
[VOICE] select Voice select Effect Connection
Edit by pressing [EFFECT] once or twice
Tone Generator
block
Element or Key
Element EQ
You can set which Insertion effect, 1 or 2, is
applied to each Element (or to each key when
the Drum Voice is selected). The Insertion
effect can also be bypassed.
n The parallel connection is not available for Plug-in Voices.
Frequency
MID HIGHMID HIGH
System Effect
Reverb (REV), Chorus (CHO)
Insertion
Effect
You can select the Insertion connection from the three types shown below.
Ins 1 to 2
1
2
Effect block
EQ for which LOW and HIGH are set to shelving type
Gain
+
0
–
5 bands
LOW LOWMID
n • Voice mode: You can set one Master EQ, applied in common to all Voices.
• Performance/Multi mode: You can make independent Master EQ settings for
each individual Performance/Multi.
[VOICE] [UTILITY]
(for all Voices)
Master Effect
Ins 2 to 1
parallel
1 1
2 2
Effect connection in each mode (Effect Connection Edit)
Q (frequency bandwidth)
Frequency
MID HIGHMID HIGH
MEF display
Master EQ
[VOICE] select Voice [EDIT]
[SHIFT]+[COMMON] General display
"MEQ"
[VOICE] [UTILITY] MEQ display
(for all Voices)
Owner's Manual
Output
61