Patch The Input Unit To An Input Channel - Yamaha CS1D Operating Manual

Patch the input unit to an input channel

Patch the input jack to which you connected the input source to input channels 1/2. For details of the procedure, refer to
page 33.
[Procedure]
1. Turn on the power in the order of the PM1D system
monitor system.
2. In the LCD FUNCTION ACCESS block, press the
INPUT [PATCH] switch several times to access the
following screen.
LCD FUNCTION ACCESS
block
INPUT [PATCH] switch
3. Patch the input source to input channels 1/49 and
2/50.
The following illustration shows an example of when
jacks 1/2 of an AD card (LMY4-AD) installed in slot
1 of the AI8 are patched to input channels 1/2.
Checking the operation of an output unit
41