Time Code Section; Scene Memory Section - Yamaha CS1D Operating Manual

TIME CODE section

1 TIME CODE indicator
This is a realtime display of the SMPTE time code
(LTC) that is input from the TIME CODE IN con-
nector in the rear panel of the CS1D, or of the time
code that is generated within the PM1D system.
This will not be displayed if the TIME CODE IN set-
ting in the TC EVENT screen is turned OFF, or if
TIME CODE is not input after changing this setting.

SCENE MEMORY section

1 SCENE MEMORY [NUMBER] indicator
This displays the last stored or recalled scene mem-
ory number.
2 SCENE MEMORY [CURRENT]/[PREVIEW] LEDs
These indicate whether Normal mode or Preview
mode is selected as the operation when Recall is per-
formed.
When the [CURRENT] LED is lit (Normal mode)
In this mode, scenes will be stored and recalled as
usual.
In this mode, the setting values shown on the CS1D
will always match the current state of the mix param-
eters.
When you recall a new scene in this mode, the mix
parameter values will be rewritten by the new scene.
When the [PREVIEW] LED is lit (Preview mode)
In this mode, you can check or edit a scene stored in
memory, a unit, a patch, or a name without affecting
the signal processing of the system.
When you recall a new scene in this mode, the mix
parameter values, and unit, patch, name setting val-
ues of that scene will be shown by the CS1D top
panel, but the internal signal processing will not be
affected.
1
HOUR MINUTE SECOND
TIME CODE
Hint
You can make settings in the display (MIDI/GPI/TC
function TC EVENT screen) to select the source
(internal or external) of the time code that is dis-
played.
1 3 2
CURRENT
NUMBER
NAME
SCENE MEMORY
3 SCENE MEMORY [NAME] indicator
This displays the title (sixteen characters) of the
scene memory shown in the SCENE MEMORY
[NUMBER] indicator.
If a scene with a specified FADE TIME is recalled, the
title will blink during the fade. For details refer to
"CS1D Reference Manual (Software)" ( p.25).
FRAME
PREVIEW
MIX OUT
MATRIX OUT
Meter bridge block
103