Stereo Output Block - Yamaha CS1D Operating Manual

CS1D Reference Manual (Hardware)

STEREO OUTPUT block

[Function]
This block mixes the signals that are sent from the input channels and the output channels to the STEREO
bus, and sends them to the output units that are patched to the STEREO A/B channels. If you are using the
PM1D system is used in LCR mode and the CENTER BUS CONTROL button is turned on in the LCR screen
of the PAN/ROUTING function or the MATRIX/ST function, the CENTER bus signal will be output from the
STEREO B channel. In this case, the STEREO B channel will function as a control channel for the CENTER
bus.
52
ON ON
TO MTRX MONO
SEL SEL
INS INS
10 10
5 5
0 0
5 5
10 10
20 20
RCL RCL
MUTE MUTE
30 30
SAFE SAFE
40 40
50 50
60 60
CUE CUE
ST OUTPUT ST OUTPUT
A B
STEREO OUTPUT
block