MIX 1-12 – MIX 37-48/MATRIX 1-12 – MATRIX 13-24/STEREO A, B
Display a list of compressor settings for each output channel. Here you can also copy compressor settings
between output channels.
In the LCD FUNCTION ACCESS
block, press the OUTPUT [COMP]
switch (press repeatedly until the
desired output channel appears)
the tab for the desired
1 COMP graph
This mini-graph shows the compressor settings for
each output channel. By clicking the graph where the
cursor is currently located, you can access the COMP
PARAMETER popup window for the corresponding
channel. You can copy settings by dragging the graph
to another output channel.
In the case of two paired channels or the STEREO A
or STEREO B channels, the graph will be common to
These meters show the gain reduction amount of the
compressor, and the peak levels after passing through
3 COMP ON/OFF (compressor on/off)
This button switches the compressor on/off.
It is linked with the COMP ON/OFF button of the
COMP PARAMETER popup window.
4 Pair setting
This displays the output channel number and its
pairing status. You can also click the heart symbol to