Yamaha CS1D Operating Manual page 56

Using the switches of the console
1. Use the [CURSOR] switches in the data entry block
to move the cursor (the red frame) in the display to
the desired grid.
Data entry block
[ENTER] switch
2. Press the [ENTER] switch to make a
appear.
[CURSOR] switch
symbol
Checking the operation of input units
Using the track pad of the console
1. Use the track pad to move the cursor to the desired
grid. (The cursor will change to the shape of a fin-
ger.)
Data entry block
2. Click the desired grid to make the
appear.
The screen will appear as follows when an input
source has been patched to input channels 1/2.
For an AI8 with a mic/line input card (LMY2-ML)
installed
For an AI8 with an AD card (LMY4-AD) installed
For a DIO8 with a digital I/O card installed
Track pad
symbol
35