Sys/W.clock (System/Word Clock) Function; Make Settings Related To System/Word Clock; System Connection - Yamaha CS1D Operating Manual

Global functions

SYS/W.CLOCK (system/word clock) function

Make settings related to system/word clock

SYSTEM CONNECTION

[Function]
Here you can check connections between units in the PM1D system. You can also select the operation mode
that determines the operation of the entire system.
Console
IN the LCD FUNCTION
ACCESS block, press the [SYS/
W.CLOCK] switch (press repeat-
edly until the screen shown at the
right appears)
DisplayDisplay
MENU button SYS/
W.CLOCK button SYSTEM
CONNECTION tab
[Screen functions]
1 OPERATION MODE
Specify the system configuration and connection
method of the console (CS1D) and engine (DSP1D-
EX {DSP1D}).
By clicking the button you can choose between
the following two modes.
Select the mode appropriate for the system configu-
ration or connections you are using.
Console x 1 <–> Engine x 1
This is a system consisting of one console and one
engine.
44
1
If the engine is the DSP1D-EX, the system will oper-
ate with 96 monaural input channels. If the engine is
the DSP1D, the system will operate with 48 monau-
ral input channels.
Console 1 <–> Engine 2 (Mirror Mode)
This is a system consisting of one console and two
engines in a mirrored connection.
In this mode, one of the two engines (A/B) performs
the actual signal processing, and the other is used as a
spare.