Connect The Monitor System - Yamaha CS1D Operating Manual

Connect the monitor system

In order to check the operation of an analog output unit, you will need to connect a monitor system such as a set of pow-
ered speakers or a power amp + speakers to a DA card (LMY4-DA) installed in the AO8 analog output unit.
If you are checking the output channels of a DIO8
digital input/output unit, connect the output con-
nector of the digital I/O card (MY8-AT, MY8-TD,
MY8-AE) to the digital input connector of a DAT
recorder or digital MTR (multi-track recorder) of
the same format as that card. In this case, it will not
be possible to directly monitor the signal via the
monitor system, so you will need to arrange things
so that the signal can be monitored via the head-
phone jack or analog output jacks of the recorder.
1 2 3 4 5 6 7 8
AO8 analog output unit
L R
Monitor system
Checking the operation of an output unit
OUTPUT UNIT NO.
INPUT SELECTOR
A
B
POWER
ON/ OFF
ANALOG OUTPUT BOX
39