Yamaha CS1D Operating Manual page 358

Global functions
8. ST B [L/R]
Output of STEREO B channel [L/R]
9. ST A [L/R] INS
Insert Out of STEREO A channel [L/R]
10. ST B [L/R] INS
Insert Out of STEREO B channel [L/R]
Hint
If a signal route 1–6 is selected, you can choose L/R
independently. (But not if the corresponding channel
is paired.)
If both L/R are "OFF" (i.e., when no signal route has
been assigned), selecting one of a pair of channels or
one side of the STEREO A/B channel will cause both
channels to automatically be assigned to L/R.
3 Effect
The currently selected effect is shown by name and
by graphic.
It is not possible to switch the type of effect in this
screen. If you wish to use a different effect, use the
effect library to recall a program that contains the
desired effect.
Hint
If a signal route is assigned only to the input channel
of one side of the effect, the effect will be processed as
mono-in/stereo-out.
If signal routes are assigned to both input channels,
the processing will depend on the effect type. "STE-
REO" types independently process the input signals
from the L/R channels. "MIX" types mix the L/R
channel signals before processing them, and output
the result in stereo. For details on the type to which
each effect belongs, refer to "CS1D Reference Manual
(Appendices)."
When the signal path is assigned to only one
input channel
INPUT L or R
INPUT L R
When the signal path is assigned to both input
channels
STEREO type effects
INPUT L
INPUT R
MIX type effects
INPUT L
INPUT R
10
L RETURN
EFFECT
R RETURN
EFFECT L L RETURN
EFFECT R R RETURN
L RETURN
EFFECT
R RETURN
4
5 6
4 TYPE
This knob selects the type of effect.
The types available for selection will depend on the
effect that is displayed in 3.
5 BYPASS
This button temporarily bypasses the effect.
While this button is turned on, only the original
("dry") sound will be output.
6 CUE
This button monitors the effect output. CUE will be
defeated when you switch screens.
7 EFFECT LIBRARY
This button accesses the EFFECT LIBRARY popup
window, in which you can store/recall parameters as
effect programs ( p.190).
8 OUTPUT L/R
These buttons select the signal route that will be
patched to the L/R output channels of the internal
effect.
When you channel these buttons, a popup window
will appear, in which you can select the signal.
The following signal routes can be selected.
CH1–CH96 {CH1–CH48}
Input of input channels 1–96 {1–48}
CH1 INS–CH96 INS {CH1 INS–CH48 INS}
Insert In of input channels 1–96 {1–48}
ST1–ST8 {ST1–ST4} [L/R]
Input of ST IN channels 1–8 ({1–4}.
ST1 INS–ST8 INS {ST1 INS–ST4 INS} (L/R)
Insert In of ST IN channels 1–8 {1–4} (L/R)
MIX 1 INS–MIX 48 INS
Insert In of MIX channels 1–48
MTRX 1 INS – MTRX 24 INS
Insert In of MATRIX channels 1–24
ST A [L/R] INS
Insert In of STEREO A channel (L/R)
ST B [L/R] INS
Insert In of STEREO B channel (L/R)
7
8 9