Turn Off The Power - Yamaha CS1D Operating Manual

CS1D Operating Manual (Start-up)
Is the Solo function turned on?
If the [SOLO] switch is turned on in the MASTER
block CUE section, and the [CUE] button of any
channel is turned on, the signals of the other chan-
nels will be muted. Turn off the [SOLO] switch
("CS1D Reference Manual (Hardware)"

Turn off the power

You have now finished the system check of the "CS1D Operating Manual (Start-up)."
We recommend that you store the current state as a scene memory before you turn off the power supply (PW1D). If the
current unit connection state differs from the unit connection state the next time the power is turned on, patch settings
etc. may be modified. For the procedure of storing a scene, refer to "CS1D Reference Manual (Hardware)" ( p.89) or
"CS1D Reference Manual (Software)" ( p.18).
Lower the faders of the STEREO OUTPUT block, and turn off the power in the order of the monitor system
system.
Before you move the CS1D, you must tilt the display backward until it locks into place.
Before turning on the engine (DSP1D) or the console power supply (PW1D), you must wait at least five seconds
after the power was turned off. Failing to observe this waiting period may cause malfunctions.
46
p.81).
PM1D