Yamaha CS1D Operating Manual page 464

Output functions
B
C
D
E
F
A CH LIBRARY (channel library)
This button accesses the OUTPUT CH LIBRARY
popup window in which you can store/recall mix
parameters by channel.
B DCA group/MUTE group
This area shows the DCA groups/MUTE groups to
which this channel belongs.
You can also change the settings.
C RECALL SAFE/MUTE SAFE
This area displays the on/off status of mute safe (a
state in which the channel is exempted from mute
group operations) and recall safe (a state in which
the channel is exempted from scene recall opera-
tions).
You can also modify these settings.
D BAL (balance)
This knob controls the post-fader left/right balance
of the STEREO A/B channel or of paired MIX chan-
nels/MATRIX channels.
E MONO (stereo B monaural on/off)
This button will be displayed only if the STEREO B
channel is selected. If this button is turned on, the
STEREO B channel will be monaural. This is linked
with the [MONO] switch of the CS1D.
LCR (LCR on/off)
The button for this parameter will be displayed only
if a MIX channel is selected. If this button is turned
on, the PAN parameter will be used as the LCR pan
when the signal is sent from the MIX channel to the
STEREO bus.
F INSERT
This displays the currently selected insert I/O point
(the location in the signal path at which an external
device is inserted) for the channel.
116
You can also use the ON/OFF button to switch inser-
A
tion on/off.
G Level meter
This peak level meter indicates the output level of the
channel.
G
The location at which the level is detected is specified
in METER function.
The
a metering point, PRE EQ, POST EQ, POST COMP,
or INSERT IN of the currently selected channel.
H Fader
This fader adjust the output level of the channel. It is
H
linked with the [LEVEL] encoder or STEREO A/B
fader on the CS1D top panel.
I CUE
This button monitors the output channel. It is linked
I
with the MIX [CUE] switch, MATRIX [CUE] switch,
J
or STEREO [CUE] switch on the CS1D top panel.
J ON/OFF
This button turns the output channel on/off. It is
linked with the MIX [ON] switch, MATRIX [ON]
switch, or STEREO [ON] switch on the CS1D top
panel.
[Procedure]
Pairing output channels
1. Select one of the functions OUT EQ, OUT COMP,
OUT DELAY, MATRIX/ST, OUT CH VIEW, or
METER, and access the screen for the channel that
you wish to pair.
2. Click the divided heart symbol for the channel that
you wish to pair.
The MIX PAIRING popup window will appear.
In this window you can select how parameter settings
will be handled when the channels are paired.
MIX A to B (a channel number will appear in A
and B)
The parameters of MIX channel A will be copied to
MIX channel B.
MIX B to A (a channel number will appear in A
and B)
The parameters of MIX channel B will be copied to
MIX channel A.
and CLIP meter will light if clipping occurs at