Connect An Input Source - Yamaha CS1D Operating Manual

Connect an input source

Connect one of the following input sources according to the type of input unit or card that you wish to check.
To check a mic/line input card (LMY2-ML)
installed in the AI8
Connect a line output device such as a CD player or
DAT recorder to input jacks 1A and 2A of the LMY2-
ML.
1 2 3 4 5
AI8 input unit
CD player/DAT recorder
To check an AD card (LMY4-AD) installed in the
AI8
Connect a line output device such as a CD player or
DAT recorder to input jacks 1/2 of the LMY4-AD.
1 2 3 4 5
AI8 input unit
CD player/DAT recorder
32
6 7 8
INPUT UNIT NO.
PHANTOM MASTER
ON
+48V
OFF
POWER
ON/ OFF
ANALOG INPUT BOX
L R
6 7 8
INPUT UNIT NO.
PHANTOM MASTER
ON
+48V
OFF
POWER
ON/ OFF
ANALOG INPUT BOX
L R
To check an input channel of a digital I/O card
(MY8-AT, MY8-TD, MY8-AE) installed in the DIO8
Connect the digital output connector of a DAT
recorder or digital MTR (multi-track recorder) that
matches the format of your digital I/O card. In this
case, make connections and settings so that the sig-
nals are sent from the recorder to input channels 1/2
of the digital I/O card.
DIO8 digital input/output unit
DIGITAL OUT
ADAT
ADAT digital MTR
DIGITAL I/O
8-TRACK DIGITAL
TASCAM digital MTR
INPUT 1/2 3/4 5/6 7/8
(female)
DIGITAL OUT (AES/EBU)
00.00.00.00
I/O UNIT ID
PORT B SELECTOR
5-8
1-4
POWER
ON/ OFF
Special AES/
EBU cable for
the MY8-AE
OUT
PUT 1/2 3/4 5/6 7/8
(male)
DAT
DAT recorder