Introduction; Purpose Of The Programming Guide; Supported Software Versions; Document Version - Danfoss VLT FC 102 Programming Manual

Programming Guide | VLT® HVAC Drive FC 102

Introduction

1

Purpose of the Programming Guide

1.1
This programming guide provides information required for setting up parameters in a drive. The guide contains the following main areas:
How to use the local control panel (LCP)
l
Detailed descriptions of all parameters
l
Troubleshooting
l

Supported Software Versions

1.2
Supported software versions: 7.5x
This programming guide can be used for all VLT® HVAC Drive FC 102 drives.
The software version number can be read from parameter 15-43 Software Version.

Document Version

1.3
This guide is regularly reviewed and updated. All suggestions for improvement are welcome.
The original language of this guide is in English.
Version
AU430028034214, version 19

Type Approvals and Certifications

1.4
The following table shows examples of possible type approvals and certifications for drives.
Drives of enclosure size T7 (525–690 V) are not UL listed.
Table 1: Type Approvals and Certifications
© 2024.10
Remarks
Update to new software version
NOTICE
089
Software Version
7.61
AU430028034214en-001901 / 130R0310 |
Introduction
13