Danfoss VLT FC 102 Programming Manual page 160

Programming Guide | VLT® HVAC Drive FC 102
Setup: All setups
Data type: Uint8
The options for this parameter are the same as those listed for parameter 5-10 Terminal 18 Digital Input.
5-15 Terminal 33 Digital Inputs
Default value: Size related
Setup:
All setups
Data type: Uint8
The options for this parameter are the same as those listed for parameter 5-13 Terminal 29 Digital Input.
5-16 Terminal X30/2
Default value: Size related
Setup: All setups
Data type: Uint8
The options for this parameter are the same as those listed for parameter 5-10 Terminal 18 Digital Input.
5-17 Terminal X30/3 Digital Input
Default value:
Size related
Setup: All setups
Data type:
Uint8
The options for this parameter are the same as those listed for parameter 5-10 Terminal 18 Digital Input.
5-18 Terminal X30/4 Digital Input
Default value:
Size related
Setup: All setups
Data type:
Uint8
The options for this parameter are the same as those listed for parameter 5-10 Terminal 18 Digital Input.
Parameter 5-19 Terminal 37 Safe Stop
Default value: –
Setup: 1 setup
Data type: Uint8
Options [4] PTC 1 Alarm to [9] PTC 1 & Relay W/A are only available when the VLT® PTC Thermistor Card MCB 112 is connected.
160 | © 2024.10
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
NOTICE
Parameter Descriptions
–
True
Option
–
True
Option
–
True
Option
–
True
Option
–
True
Option
–
True
AU430028034214en-001901 / 130R0310