Alarm Log - Danfoss VLT FC 102 Programming Manual

Programming Guide | VLT® HVAC Drive FC 102
Data type: TimeOfDay
Array parameter; Date & Time 0 – 49. This parameter shows which time the logged event occurred.
6.17.9 15-2* Operating Data Log
15-28 kWh Counter Reset Time
Default value: Size related
Setup:
All setups
Data type: TimeOfDay
View the date and time for the last kWh counter reset.
15-29 Running Hour Reset Time
Default value: Size related
Setup:
All setups
Data type: TimeOfDay
View date and time for the last running hour counter reset.

15-3* Alarm Log

6.17.10
Parameters in this parameter group are array parameters where up to 10 fault logs can be viewed. 0 is the most recent logged data and 9
is the oldest. Fault codes, values, and time stamps can be viewed for all logged data.
15-30 Alarm Log: Error Code
Default value: 0
Setup: All setups
Data type: Uint16
View the error code and look up its meaning in the table Alarm/Warning Code List in the chapter Troubleshooting.
15-31 Alarm Log: Value
Default value: 0
Setup:
All setups
Data type: Int16
View an extra description of the error. This parameter is mostly used with alarm 38, internal fault.
15-32 Alarm Log: Time
Default value:
0 s
Setup: All setups
Data type:
Uint32
400 | © 2024.10
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Parameter Descriptions
False
Range, 0 - 0
0
True
Range, 0 - 0
0
True
Range, 0 - 65535, Array [10]
0
False
Range, -32767 - 32767, Array
[10]
0
False
Range, 0 - 2147483647, Array
[10]
0
False
AU430028034214en-001901 / 130R0310