Danfoss VLT FC 102 Programming Manual page 689

Programming Guide | VLT® HVAC Drive FC 102
47-22 Previous Mean
Default value: 0%
Setup: All setups
Data type: Uint16
This parameter shows the average of stator resistance readings for the previous baseline.
47-23 Previous Min
Default value: 0%
Setup:
All setups
Data type: Uint16
The parameter shows the minimum value of motor stator resistance for previous baseline.
47-2* Stator Res. Load
6.37.5
47-24 Actual Max
Default value:
0%
Setup: All setups
Data type:
Uint16
This parameter shows the maximum load dependent stator resonance. An indexed parameter with 20 pointers showing stator resonance
load recordings from minimum to maximum.
47-25 Actual Mean + 3 Std. Dev.
Default value:
0%
Setup: All setups
Data type: Uint16
This parameter shows the average and standard deviation of stator resonance load recordings for the active baseline.
47-26 Actual Mean
Default value:
0%
Setup: All setups
Data type:
Uint16
This parameter shows the average of stator resonance load recordings for the active baseline.
47-27 Actual Min
Default value: 0%
Setup: All setups
Data type: Uint16
© 2024.10
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
Parameter type:
Conversion index:
Change during operation:
AU430028034214en-001901 / 130R0310 |
Parameter Descriptions
Range, 0 - 100%, Array [20]
-2
False
Range, 0 - 100%, Array [10]
-2
False
Range, 0 - 655.35%, Array [40]
-2
False
Range, 0 - 655.35%, Array [20]
-2
False
Range, 0 - 655.35%, Array [20]
-2
False
Range, 0 - 655.35%, Array [20]
-2
False
689